Cara Setting Tp-link Tl-wr940n

This is the
port forwarding
guide for the
TP-Link TL-WR940N 3.18.We also have port forwarding guides for the following related routers:

  • TP-Link TL-WR940N

Pick the guide that most closely matches your router.

router protects your home network by limiting incoming connections from the internet. Sometimes it is necessary to unblock some of those connections like when you want to create a direct connection for gaming, use a specific application, or set up a new device on your network. This process is called forwarding or opening a port. In your TP-Link TL-WR940N router you many need to
open a port, which means assigning a port number or set of port numbers to a specific IP address. This routes the incoming data to the correct device on your network.

The following steps will show you how to open ports on the TP-Link TL-WR940N router:

  1. On the computer or device that you are forwarding ports to, you will need to set up a
    static IP address.
  2. Log in to your TP-Link TL-WR940N router.
  3. Find the Virtual Servers section in your TP-Link TL-WR940N router.
    • Click the
      tab at the left of the screen.
    • Find the
      Virtual Servers
      tab at the left of the screen and click on it.
  4. Go ahead and create a
    Virtual Servers

The process of opening ports in your router may seem like a difficult task. If so, you are titinada alone! We are here to help walk you through the steps to open a port in the TP-Link TL-WR940N router.

We think that forwarding a port should be easy. That’s why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1 – Setup A Static IP Address

Set up a
static IP address
in the device that you are forwarding a port to. This is an important step that keeps your ports open even after a reboot, power outage, or another type of device or router disconnect.

  • Recommended
    – Our free programa will setup a static IP address for you.

    → Download Network Utilities today!

  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2 – Login To Your TP-Link Router

In kiriman to login to the TP-Link TL-WR940N router you need to use a web browser. The TP-Link TL-WR940N router uses what is called a web interface where you can access and control router settings.

Go ahead and open up your favorite web browser. If you don’t have a favorite or are not sure what this means, open up Chrome, Firefox, or Edge.

If this step is confusing, we have simplified it for you with this link:
Login to your TL-WR940N Router

Find the
address kafetaria
once you have opened up a web browser. This is usually located at the top of the page, like in the image below.

Image of a browser address bar
Browser address kafe

Above is an example of what a web browser address bar looks like. Find the address bar in your web browser and type in your router’s IP address.

TP-Link TL-WR940N
router’s default IP address is:

Enter your router’s IP address into the address kedai kopi of your browser and click the enter button on your keyboard. A box like the one below should appear.

This is the login page from your TP-Link router.

To login, enter the username and password for the TP-Link TL-WR940Ns.
Important Note:
If you have changed them in the past, you need to enter in those values.

  • The default TP-Link TL-WR940N Router Username is:
  • The default TP-Link TL-WR940N Router Password is:

Once you enter your username and password, click the

TP-Link Usernames and Passwords

If the username and password did not work I recommend checking out our
Default TP-Link Router Passwords

If, after trying the above list of passwords you still can’t login you may need to consider a reset for your router. Learn how to do that by reading our
How to Reset a Router
guide. After resetting the TP-Link TL-WR940N router your username and password are reverted back to factory defaults.

Step 3 – Find The Port Forwarding Section

After a successful login to the TP-Link TL-WR940N router you should be on the home page of your router. Now you need to find the
Virtual Servers

This is the home page from your TP-Link router.
  • Click the
    tab, which is at the left of the screen.
  • Find the
    Virtual Servers
    tab located near the left of the screen and click on it.

You should now be on a page that says
Virtual Servers.

Step 4 – Create A Port Forward Entry

Make sure that you must open a port in your router before doing so since this will allow data to come through the firewall portion of your router to a specific device. It is possible that this could lead to malicious traffic on your network. However, don’kaki langit let this warning stop you from making this change if you need it because the risk is very low.

Here are the ports to forward for

Xbox Live

  • TCP Ports:
  • UDP Ports:

If you are looking for the ports for a different application you can find it by either:

  • Browsing our List of Games
  • Check out our our List of Games by Genre
  • See our List of all Applications
port forwarding
This is the port forwarding page from your TP-Link router.
  1. Click the button that says
    Add New.
  2. If you are forwarding a single port number, enter it into the
    Service Port
    box. If you are forwarding a range of ports, enter the lowest number of that range into the
    Service Port
    box, followed by a hyphen followed by the largest number. For example, a range of port numbers might look like this:
  3. Enter the same values into the
    Internal Port
    box that you entered into the
    Service Port
  4. Go ahead and enter the IP address that you are forwarding ports to into the
    IP Address
    box. It is possible for this to be either the IP address of your computer or of any other device on your network that you want ports forwarded to.
  5. In the
    dropdown box, select the protocol type of the ports you are forwarding. Choose
    if your router has that option. Otherwise, choose either
    as needed. If you need to forward a port for both
    and your router does titinada have the
    option, then you need to create two entries.
  6. Make the
    selection in the
    drop-down list.
  7. To apply these changes, remember to click the
    button at the
    of the page when you are completely finished.

Test Your Ports To See If They Are Open

Use our
Network Utilities
software, (which includes a free Open Port Checker tool) to test your network to see if you have forwarded ports in the TP-Link TL-WR940N router correctly.
Open Port Checker
is the only online port checking tool that has
Guaranteed Results.

More Guides To Check Out:

  • We have software that does all of this and more called
    Network Utilities.
  • Learn how to
    Setup your router.
  • A full list of
    games and applications
    that require port forwarding. []