Cara Cheat Coc Dengan Cheat Engine Di Pc

Tiba a game.
Open the game that you want to use with Cheat Engine.

• Remember, this cannot be an online multiplayer or peladen-based game.

Select your game’s process.
Scroll through the list of processes until you find your game, then click the game’s name. If you’re attempting to use Cheat Engine for a browser game, you’ll select your browser’s name instead.

• If your game doesn’ufuk appear in the “Processes” list, you cannot edit it in Cheat Engine.
• You may first have to click the
  Processes
  tab at the top of the window.

Determine a game aspect to change.
In pesanan for you to be able to change a game aspect, the aspect must have a number attached to it (e.g., amount of ammo, health, or items).

• The number must be on-screen. For example, if you want to change the number of a certain item in your inventory, you would first have to open your inventory to the page on which the item’s number is available.

Minimize the game window and click over to Cheat Engine.
You’ll need to pull up the Cheat Engine window while the game is minimized.

• Don’horizon pause the game when you do this.

Select a scan type.
There are five scan types you can do when you tiba a new scan. The two main ones you’ll be using are “Exact Value” and “Unknown initial value”. Use the drop-down menu next to “Scan Type” to select the type of scan you want to do. The scan types are as follows:

• Exact value:
  Use this scan type if you know the exact number you want to change. For example, if you know the exact number of lives, or ammo you have, you can select this option.
• Unknown initial value:
  In video games, sometimes a value isn’t represented with a number. For example, your health may be represented by a health meter instead of a number. In which case, you don’t have an exact number for how much health you have. There is a number that represents your health, you just don’t see it on-screen. In this case, you can select
  Unknown initial value.
• Bigger than…:’
  Select this option if you don’t know the exact number you’re look for, but you know the smallest possible value.
• Smaller than…:
  Select this option if you don’t know the exact value, but you know the largest possible value.
• Value between…:
  This option allows you to enter a range of values to look for.

Select a data type:
The data type represents how a value is stored in the memory. It can be hard to know what data type to select, so this can take a little guesswork. Use the drop-down menu next to “Data type” to select a data type. If you can’t find the value you are looking for using one data type, click
New Scan
and try again using a different data type. Some of the more common data types you will be using are as follows:

• Bytes:
  2 Bytes and 4 Bytes are the data types you’ll be using most often. Most Windows applications use 4 Bytes, so start with that. You can also find these values using 2 Bytes. 1 Bytes and 8 Bytes can work as well, but you may run into problems.
• Float:
  Floating point data types are values that have a decimal point in the value (though you may titinada see the decimal point on-screen in the game). Some times games store values as floating points to prevent simple memory scans. If you’re not able to find the value you are looking for by scanning bytes, try scanning for floating points.
• Double:
  Doubles are similar to floating points, but they can contain twice the amount of digits. If you are unable to find a value by scanning for bytes or floats, try scanning for it as a double.
• All:
  This option scans all values of all data types. This is a good option if you don’ufuk know what you are searching for, but it will also return more search results that you will need to narrow down.

Return to Cheat Engine and scan for the updated number value.
Minimize the game again and click back over to Cheat Engine. Type the new number into the “Value” section, then click
Next Scan. This will scan all the values in your first scan and narrow down the addresses to the ones that changed to the value you entered in the “Value” bar.

• Unknown initial value:
  If you selected “Unknown initial value” for your first scan, select
  Increased value
  or
  Decreased value
  under “Scan type” depending on if the value (or meter) increased or decreased. This will scan for all values that increased or decreased instead of scanning for an exact number.

Repeat the search process until you have 4 or fewer values.
You’ll keep changing the number and then searching for the updated number berayun-ayun you have no more than 4 values listed on the left side of Cheat Engine.

• You should eventually see the previous number you searched for listed in the “Previous” column of each value’s number, while the current value of the item will be in the “Value” column.

Add the values to the address list.
You can either double-click a value to add it to the address list at the bottom, or you can click an address to select it and click the red, diagonal arrow in the bottom-right corner of the list of values. Doing so will place the values in the list of addresses at the bottom of the window.

• To select multiple addresses, you can hold “Shift” and click the top address and the bottom address.

Change the number to a value you want.
Use the following steps to change the value number:

• Double-click the number below “Value” in the list at the bottom of Cheat Engine.
• Enter a new number in the “Value” field.
• Click
  Ok.

Check to see if the value updated in your game.
When you re-open the game, the value you edited should reflect the number you just entered. The next part teaches you how to stop a value from changing by replacing it with non-operational code.

• You may need to change the value one more time before it will update.

Click


Replace

.
This replaces the code with non-operational (NOP) code.
^[1]

• If there is more than one item in the list, go ahead and select all of them.

Click


Stop

.
This puts the non-operational code into effect. This will prevent the value from changing in the game.

• To restore the original code, select the item in the list and clck
  Show disassembler. Right-click where it says “NOP” and click
  Restore with original code. If you don’t see this option, click
  Replace with code that does nothing, click
  Yes. Then right-click
  NOP
  again and select
  Restore with orignal code.

Right-click the address and click


Find out what writes to this address

.
This opens the debugger window.

• If there is multiple addresses, open a debugger window for as many addresses as Cheat Engine will allow.

Return to the game and change the value again.
Once again, return to your game and do something to change the value you want to change (i.e. fire your weapon, get hit). This will cause the instruction that writes to that address to appear in the debugger window.

• If nothing changes in the debugger window, it is not the correct address. Try a different one.

Return to Cheat Engine and click the instruction in the list.
It’s in the debugger window. There may be more than one address. If that is the case, look for the instruction that has a different set of characters between the “[‘ and “]” brackets than the rest. If there isn’cakrawala a single address that has different characters, check to see if the pointer is the same for all of them.

• If the characters have a + and a number at the end (i.e. [ESI+14]). That is an offset number. Write it down. You’ll need it later.

Click


More information

.
This displays instructions that happen when the value changes in the Extra Info screen. This also lists the pointer that writes to the address.

• You can also find the address by checking the characters in the bracket, and then checking what number comes after those characters listed at the bottom. For example, if the address has “[rdx]” next to it, look for RDX=xxxxxxxx at the bottom.

Click the checkbox next to “Hex” and do a new scan for the pointer address.
The address of the pointer is listed in the text that says “The value of the pointer needed to find this address is probably xxxxxxxxx”. Use the following steps to search for the address at the end of this sentence.

• Click
  New Scan.
• Click the checkbox that says “Hex” next to the “Value” field.
• Enter the pointer address in the Value field and click
  First scan.

Double-click the pointer address.
This adds the address to the list at the bottom of Cheat Engine.

• If the address is listed in green in the scan results. This means it is a static address and probably the pointer you are looking for. In some cases, the pointer you find may also be a pointer. This is called a multilevel pointer. In this case, you’ll need to repeat these steps for each pointer you find in kiriman to find out what the root static pointer address is.

Paste the pointer address in the field below “Pointers” and click


Ok

.
This adds a new address for the pointer that controls the value that you want to change. The address for the pointer you just created will read something like “P–>xxxxxxxx”. This indicates that this is a pointer pointing to a specific address.

• If there is an offset number, enter it in the space above the field where you paste the address.
• If there is more than one pointer, click
  Add offset. This will add more offset number boxes above the distrik where you paste the address. Enter the correct offset number in each box.

Scan for a value you want to stop
.
In some games, multiple objects share the same code. Injecting code into one object will affect all the others too. So you might freeze your own health bar, only to realize that the health of all enemies is also frozen. In this case, you need to find out how to distinguish between different objects and inject a script that only affects the object you want.

• In bestelan to inject scripts for different objects, you need to know some assembly code. However, it’s titinada too hard to create a basic script.

Select all addresses in the list of accessed addresses window.
Once you have an address for all objects that share the same address in the list of accessed addresses, simply click and drag to highlight all of them.

• Alternatively, you can right-click each individual address and click
  Show register states.^[2]
  

Disect the data of structure of all the listed addresses.
Use the following steps to disect the data structure for the list of addresses:

• Right-click the selected addresses.
• Click
  Open disect data with selected addresses.
• Click
  Ok.
• Enter a name for the data structure and click
  Ok.
• Click
  Yes.
• Enter a starting size of the struct or leave it as is, and click
  Ok.

Find a value that is the same for the player(s), but different for other objects.
Whether you are looking at the data structure or the register for each object, you need to find a value that is the same for all allies, but different for the enemies. For example, if Team 1 has two player characters, and Team 2 has two computer-controlled characters, the Team 1 characters may be represented with a value of 1, and Team 2 might have a value of 2.

• If can’t find a value that is the same for allies, but different for enemies, you can make one. Simply right-click one of the values (such as a pointer), and click
  Add Element. Select “4 Bytes” as the data type and give it an offset number value that is titinada taken. Offset numbers are listed to the left in the data dissection structure table.

Open a new code injection template for the instruction.
Return to the Memory Viewer window and open a new code injection template for the instruction that writes to the different addresses. Use the following steps to do so:

• Click the instruction in the Memory Viewer window.
• Click
  Tools
  in the menu kedai minum at the top.
• Click
  Auto Assembler.
• Click
  Template
  in the menu bar at the top.
• Click
  Code Injection.

Add code that jumps to the original code.
After you create a line of code that jumps to the section for the object you want to change, you need to add a line of code that jumps to the original code if value doesn’falak corrispond to the player or ally. Use the “jmp” command to create a line of code that jumps to the orignal code after the line of code that jumps to the original code (or another set of code you create that does something different).

• One way to keep things simple is not to add any new labels. Just create a comparison code at the end of “newmen:” to differenciate between allies and foes. Then add a line of code that jumps to the exit if it’s an ally. If it’s an enemy, have it jump to the original code. This will make it so that if the player or an ally is attacked (or fires weapons uses consumables, etc), nothing will change, but if an enemy is attacked, the code will execute as normal.

Click


Execute

.
This executes the code you entered. If all goes well, you will have injected new code that differentiates between allies and foes. The following is an example of a simple script you can use to differentiate between allies and foes:

                    
                    alloc
                    (
                    newmem
                    ,
                    2048
                    ,
                    "
                    Tutorial-x86_64.exe
                    "+
                    2
                    EB6D
                    )
                    segel
                    (
                    returnhere
                    )
                    label
                    (
                    originalcode
                    )
                    label
                    (
                    exit
                    )
                    label
                    (
                    player
                    )
                    //
                    New
                    stempel
                    for
                    the
                    player.
                    newmem:
                    //
                    This
                    calls
                    a
                    new
                    memory
                    address.
                    cmp
                    [
                    rbx
                    +
                    14
                    ],
                    1
                    //
                    This
                    differenciates
                    between
                    ally
                    team
                    members
                    and
                    enemy
                    team
                    je
                    player
                    //
                    This
                    jumps
                    to
                    the
                    player
                    section
                    if
                    object
                    is
                    on
                    the
                    player
                    '
                    s
                    team.
                    jmp
                    originalcode
                    //
                    This
                    jumps
                    to
                    the
                    original
                    code
                    if
                    object
                    is
                    an
                    enemy
                    team.
                    player:
                    //
                    This
                    creates
                    a
                    new
                    section
                    for
                    the
                    Player
                    '
                    s
                    team
                    jmp
                    exit
                    //
                    This
                    jumps
                    to
                    the
                    exit
                    and
                    does
                    nothing
                    for
                    the
                    player
                    '
                    s
                    team.
                    originalcode:
                    //
                    This
                    is
                    the
                    original
                    code
                    section
                    movss
                    [
                    rbx
                    +
                    08
                    ],
                    xmm0
                    //
                    This
                    executes
                    original
                    insturctions
                    (
                    for
                    the
                    enemy
                    team
                    )
                    exit:
                    //
                    This
                    section
                    ends
                    this
                    script.
                    jmp
                    returnhere
                    "
                    Tutorial-x86_64.exe
                    "+
                    2
                    EB6D
                    :
                    jmp
                    newmem
                    returnhere:
                  

Understand the terminology.
Cheat Engine deals with a lot of high-level computer code. To make things easier to understand, it helps to understand some of the terminology involved. The following are some terms used in Cheat Engine:

• Value:
  A value is anything in a computer program that has a numeric value attached to it. It games, it can be your health percentage, the number of ammo you have, or the quantity of an object you have. Cheat Engine allows you to scan for variables and make changes to them.
• Address:
  An address is the location the information is stored within the RAM. Sometimes, the location of a value can change.
• Data Type:
  A data type is how a value is stored. I can be in bytes (i.e. 2 Bytes, 4 Bytes, or 8 Bytes), it can also be a floating point, or a double.
• Pointer:
  A pointer is an address that contains a value that was written to by another address. These addresses can change every time you load a game, or sometime in the middle of a game.

Understand that Cheat Engine won’n work with many games.
Any game which has some form of cheat protection or online multiplayer functionality won’falak work with Cheat Engine, and attempting to use Cheat Engine will typically result in your account or profile being banned from online play.

• If you are somehow able to use Cheat Engine to obtain resources which are usually purchased with real money, you may be prosecuted for theft.
• Cheat Engine is a high-profile piece of software, so most games have some form of protection against it.